Press
& Wash Free Standing Lace, Appliqué, Fleece blankets,
Fabric Scarves
 |
Press
& Wash Directions:
- Cut Press and
Wash slightly larger than the hoop with about 1 inch extra
all around.
- Hoop one layer
of the stabilizer as tightly as possible. You want to achieve
a tambourine-skin type tension in the hoop.
- Hoop it with
the release paper side facing up.
- Score the release
paper with a needle and remove it exposing the sticky, pressure-sensitive
side.
- Gently press
the area of the garment to be embroidered and then apply the
sticky side of the stabilizer to the fabric. Smooth out all
wrinkles. (What you originally had didn't make sense to me
so make sure I interpreted this sentence correctly.)
- Embroider your
design.
- Trim away the
excess stabilizer.
- Rinse away excess
stabilizer using room temperature water. Tap water is fine.
How much you rinse depends on the desired effect you want.
The more you rinse, the softer the embroidery becomes.
Please note: With adhesive
stabilizers, it is recommended that embroiderers slow down
their machines and use titanium needles and/or silicone spray
on the needles.
|
|
American
Embroidery Supply
