Press & Tear Directions

1. Place one piece of Press ad Tear in the embroidery frame with the release paper side facing up.
   
2. Score the surface or the corner of the release paper
   
3. Peel back the paper to expose the pressure sensitive adhesive sticky surface.
   
4. Stick down the item to be embroidered and pat and smooth out any wrinkles.
   
5. Stitch away.
   
6. Remove the stabilizer excess stabilizer by gently tearing it away from around the design.
   
7. If you have a high or dense stitch count –above 6,000 or so stitches

You can “float an extra layer of regular tear away underneath your stitching area.

Press & Tear Photos / Designs courtesy of www.adesignbylyn.com